This post is by a banned member (kimchi64) - Unhide
OP 21 August, 2019 - 11:57 PM
(This post was last modified: 22 August, 2019 - 12:21 AM by kimchi64.)
Reply
[PLEASE READ THIS FIRST: ALL THE PROGRAMS WERE DOWNLOADED THROUGH VARIOUS FORUMS, IF YOU DO RUN, RUN ON YOUR OWN RISK, USE COMMON KNOWLEDGE TO STAY ANONYMOUS; USE A VPN; RUN SANDBOXED; ETC.]
Download:
Hidden Content
You must register or login to view this content.
VT:
https://www.virustotal.com/gui/file/52b9.../detection
1- You need a good I.P. Scanner; Here's KPortScan-3.0 which will get the job done.
What it looks like:
Now, you need IP's.
Go to this Website
Then Select the Country you want the RDP's to be from
Next, Save the IP ranges and import them into KPORT that you downloaded earlier
Import IP's, do not mess with default settings and click start!
When it's done, it will spit out a .txt file with all the IP's
Now, that we have that juicy juicy IP list, we need to start the brute process.
For this; We're going to use DUBRUTE V2.
Run DUBRUTE and follow the steps in the following images:
Next, Import your IP List from KPORT
You're almost ready; if you're not satisfied with the preexisting common password list that is provided, simply find one off the forums.
Before starting, make sure you edit your settings in CONFIG of DEBRUTE; if you have 2GB ram, set the Threads to 100, if you have 4GB ram, Set the threads to 200; ect.
For the Usernames in Debrute Use the following generic common logins:
Quote: Wrote: Show Moreadministrator
admin
admin1
user
user1
user2
test
test1
This post is by a banned member (Losanev) - Unhide
22 August, 2019 - 04:18 AM
Reply
This post is by a banned member (bulll123) - Unhide
22 August, 2019 - 04:28 PM
(This post was last modified: 22 August, 2019 - 04:30 PM by bulll123.)
Reply
(21 August, 2019 - 11:57 PM)kimchi64 Wrote: Show More[PLEASE READ THIS FIRST: ALL THE PROGRAMS WERE DOWNLOADED THROUGH VARIOUS FORUMS, IF YOU DO RUN, RUN ON YOUR OWN RISK, USE COMMON KNOWLEDGE TO STAY ANONYMOUS; USE A VPN; RUN SANDBOXED; ETC.]
Download:
VT:
https://www.virustotal.com/gui/file/52b9.../detection
1- You need a good I.P. Scanner; Here's KPortScan-3.0 which will get the job done.
What it looks like:
Now, you need IP's.
Go to this Website
Then Select the Country you want the RDP's to be from
Next, Save the IP ranges and import them into KPORT that you downloaded earlier
Import IP's, do not mess with default settings and click start!
When it's done, it will spit out a .txt file with all the IP's
Now, that we have that juicy juicy IP list, we need to start the brute process.
For this; We're going to use DUBRUTE V2.
Run DUBRUTE and follow the steps in the following images:
Next, Import your IP List from KPORT
You're almost ready; if you're not satisfied with the preexisting common password list that is provided, simply find one off the forums.
Before starting, make sure you edit your settings in CONFIG of DEBRUTE; if you have 2GB ram, set the Threads to 100, if you have 4GB ram, Set the threads to 200; ect.
For the Usernames in Debrute Use the following generic common logins:
Quote: Wrote: Show Moreadministrator
admin
admin1
user
user1
user2
test
test1
thx m8 appreciate it!
(22 August, 2019 - 04:18 AM)Losanev Wrote: Show MoreThanks man!
thx m8 apprweciate it!
(22 August, 2019 - 04:18 AM)Losanev Wrote: Show MoreThanks man!
thx m8 apprweciate it!
This post is by a banned member (yender2007) - Unhide
09 September, 2019 - 07:51 AM
Reply
Thaaanks brooo I hope it works
This post is by a banned member (Harry3210) - Unhide
09 September, 2019 - 09:34 AM
Reply
Oh sir thanks , goy gor subscribe and like
This post is by a banned member (yogijo) - Unhide
09 September, 2019 - 11:50 AM
Reply
(21 August, 2019 - 11:57 PM)kimchi64 Wrote: Show More[PLEASE READ THIS FIRST: ALL THE PROGRAMS WERE DOWNLOADED THROUGH VARIOUS FORUMS, IF YOU DO RUN, RUN ON YOUR OWN RISK, USE COMMON KNOWLEDGE TO STAY ANONYMOUS; USE A VPN; RUN SANDBOXED; ETC.]
Download:
VT:
https://www.virustotal.com/gui/file/52b9.../detection
1- You need a good I.P. Scanner; Here's KPortScan-3.0 which will get the job done.
What it looks like:
Now, you need IP's.
Go to this Website
Then Select the Country you want the RDP's to be from
Next, Save the IP ranges and import them into KPORT that you downloaded earlier
Import IP's, do not mess with default settings and click start!
When it's done, it will spit out a .txt file with all the IP's
Now, that we have that juicy juicy IP list, we need to start the brute process.
For this; We're going to use DUBRUTE V2.
Run DUBRUTE and follow the steps in the following images:
Next, Import your IP List from KPORT
You're almost ready; if you're not satisfied with the preexisting common password list that is provided, simply find one off the forums.
Before starting, make sure you edit your settings in CONFIG of DEBRUTE; if you have 2GB ram, set the Threads to 100, if you have 4GB ram, Set the threads to 200; ect.
For the Usernames in Debrute Use the following generic common logins:
Quote: Wrote: Show Moreadministrator
admin
admin1
user
user1
user2
test
test1
hqqqq shit mate
This post is by a banned member (Rayan06000) - Unhide
24 September, 2019 - 08:04 PM
Reply
This post is by a banned member (fesii007) - Unhide
25 September, 2019 - 07:01 AM
(This post was last modified: 25 September, 2019 - 07:01 AM by fesii007.)
Reply
00000000000000000000000000
000000000000000000000000000000000000000000
|